Sartorius Combics CAH1, Operating Instructions Manual

Page: 31 / 168

Operating Instructions Combics Indicators 31
The Display
There are two display modes:
– Display for weighing (weighing values and calculated values)
– Display in “Menu mode” (device settings)
The
fi gure shows the display of the Combics 2
Display in Weighing Mode
1 3 4 5
6
7
8
9
10
11 12 13 14 15 16
17
18
19
20
Appl. 1 Appl. 2 Appl. 3
2
1* Bar graph showing 10% intervals
– Shows the percentage of the weighing platform’s capacity that is “used
up” by the load on the scale (0% = lower limit, 100% = upper limit)
or
– Shows the measured value in relation to a target value (with the
“Checkweighing” or “Classifi cation” applications)
Minimum for checkweighing
Maximum for checkweighing
Target value for checkweighing
2
S
Symbol for active print job
3 R
8
Displays the active range on multiple-range scales
4
Indicates active weighing platform; fl ashes to prompt calibration/adjust-
ment
5* 1 2
Selected weighing platform 1 or 2
6 NET B/G Net/Gross value on the main display (with tare in memory or preset tare)
7
k
Identifi es the value on the main display as calculated (value not valid in
legal metrology)
8 Battery charge status
9
p
GMP-compliant printing in progress
10
Weight unit of the value displayed
11*
Numeric display; e.g., showing the reference value
12*
Symbol indicating data transfer
–
Interface initialized (profi bus/Ethernet)
– Flashes during data transfer (RS-232/485)
13* Mem
Symbol for product data memory
14
In legal metrology, on equipment with
e
not equal to
d
, the digit
bordered for identifi cation is not taken into account
15* AUTO/OPT
–
AUTO
: Depending on the weight value, a reaction is triggered in the application
–
OPT : Automatic optimization takes place for the Counting application
16 Measured value line: Weight value or calculated value
* = for Combics 2 only
Operating Design