Sartorius Combics CAH1, Operating Instructions Manual

Page: 146 / 168

146 Operating Instructions Combics Indicators
Menu Structure
BAHT
Baht/bat 1) 1.7.19
MESGHAL
Mesghal/MS 1) 1.7.20
TONS
Tons/t 1.7.21
1.DIS.DIG.
Display accuracy 1.8
ALL
Show all decimal places 1.8.1*
-1.WT.CHA
Reduced by 1 digit 1.8.2
RES.*10
10-fold increased resolution 1.8.14
+DIV. 2
Increase resolution by 2 scale intervals 1.8.15
+DIV. 1
Increase resolution by 1 scale interval 1.8.16
CAL./ADJ.
Calibration, adjustment 1.9
CAL.EXT.
External calibration/adjustment with default weight 1.9.1*
CAL.E.AUT.
External cal./adjustment, weight is detected (see 1.18.1) 1.9.2
CAL.E.USR.
External calibr./adjustment with user-defi ned weight 1.9.3
CAL.INT.
Internal calibr./adjustment (for IS scales only) 1.9.4
LIN.INT.
Internal linearization (for IS scales only) 1.9.5 1)
LIN.EXT.
External linearization with default weights 1.9.6 1)
LIN.E.USR.
External linearization with user-defi ned weights 1.9.7
1)
SET.PREL.
Setting the preload 1.9.8
DEL.PREL.
Clearing the preload 1.9.9
BLOCKED
Key locked 1.9.10
CAL.SEQ.
Calibration/Adjustment sequence 1.10
AUTOMAT
Calibration with automatic adjustment 1.10.1
Manual
Calibration with manual adjustment 1.10.2*
ZERORNG.
Zero range 1.11
1 PERC.
1 percent/max. load 1.11.1
2 PERC.
2 percent/max. load 1.11.2
5 PERC.
5 percent/max. load 1.11.3*
INIT.ZER.
Zero at Power On 1.12
1 PERC.
1 percent/max. load 1.12.1*
2 PERC.
2 percent/max. load 1.12.2
5 PERC.
5 percent/max. load 1.12.3
ON TARE
Tare/zero at Power On 1.13
ON
On 1.13.1*
OFF
Off 1.13.2
ISOCAL
Calibration prompt 1.15
Off
Off 1.15.1*
ADJ.PROM
On 1.15.2
CAL.EXT
External calibration/adjustment 1.16
ACTIVAT
Activated 1.16.1*
DEACT.
Deactivated 1.16.2
Cal.Unit
Weight unit for calibration 1.17
GRAMS
Gram 1.17.1*
KILOGR.
Kilogram 1.17.2
TONS
Ton 1.17.3
POUNDS
Pound 1.17.4
man.ext.w
Manual entry of external weights 1.18
CAL./ADJ.
Cal/Adj. weight 1.18.1
LIN. WT.1
Linearization weight 1 1.18.2 1)
LIN. WT.2
Linearization weight 2 1.18.3 1)
LIN. WT.3
Linearization weight 3 1.18.4 1)
LIN. WT.4
Linearization weight 4 1.18.5
1)
ADJ.W/O.W
Adjustment without weights 1) 1.19
NOM.LOAD
Nominal load 1.19.1
RESOLUT
Resolution 1.19.2
SENSIT.1
Sensitivity 1 1.19.3
SENSIT.2
Sensitivity 2 1.19.4
SENSIT.3
Sensitivity 3 1.19.5
SENSIT.4
Sensitivity 4 1.19.6
ZER.POIN
Zero point 1.19.7
SAVE
Save parameters 1.19.8
GEOG.DAT
Geographical data 1) 1.20
LATITUD
Latitude 1.20.1
ALTITUD
Altitude 1.20.2
GRAVITY
Gravitational acceleration 1.20.3
SAVE
Save parameters 1.20.4
1) Only in Service mode