Sartorius CAIS1, Operating Instructions Manual

Page: 83 / 164

In the
Applic./Applic.3/CLASS./Param.2/OUTP.ACT
menu, menu item 4.7,
you can make the following settings for the control outputs:
– switched off
– always on
– on at stability
The “SET” output normally changes its voltage level when the current weight
exceeds the minimum load. Alternatively, you can assign the “Ready for use”
function to this port.
Setting:
Applic./Applic.3/CLASS./PARAM.2/CTRL.SET
menu item 4.3.
Example 2 : There should be three classes.
Configuration: The “Classification" application is selected, and printout has been
set up.
O
t Enter the class limits using the
O
key.
.
1 1 0
t Enter the upper limit for Class 1 using the keypad (in this example, 110 g)
.
+
O
t Save the upper limit for Class 1.
1 3 0
t Enter the upper limit for Class 1 using the keypad (in this example, 110 g).
O
t Save the upper limit for Class 1.
t Place the sample on the weighing platform.
Operating Instructions Combics Indicators 83
Operation