Sartorius CAIS1, Operating Instructions Manual

Page: 81 / 164

Example : Enter 100 g as the upper limit of Class 1. Then enter 15%. When working
with 3 classes, this yields the following weight classes:
Class 0: up to the minimum load
Class 1: > minimum load - 100 g
Class 2: > 100 g – 115 g
Class 3: > 115 g - maximum load
When working with 5 classes, this yields the following weight classes:
Class 0: up to the minimum load
Class 1: > minimum load - 100 g
Class 2: > 100 g – 115 g
Class 3: > 115 g – 130 g
Class 4: > 130 g – 145 g
Class 5: > 145 g - maximum load
The values entered remain valid until deleted by pressing the
c
key or until
overwritten by a new value. They remain saved after the scale is switch-off.
Preparation t Open the
APPLIC. / APPLIC.2 / CLASS.
menu.
Available parameter settings * = Factory setting
MIN.INIT
Minimum load for initialization 3.6
1 digit
1 digit 3.6.1*
2 digit
2 digits 3.6.2
5 digit
5 digits 3.6.3
10 digT.
10 digits 3.6.4
20 digT.
20 digits 3.6.5
50 digT.
50 digits 3.6.6
100 diG.
100 digits 3.6.7
200 diG.
200 digits 3.6.8
500 diG.
500 digits 3.6.9
1000 dI.
1000 digits 3.6.10
CTRL.SET
Activate SET control output 4.3.
OUTPUT
SET output 4.3.1*
OP.READY
Ready to operate 4.3.2
OUTP.ACT
Activation of outputs 4.7
OFF
Off 4.7.1*
ALWAY.ON
Always on 4.7.2
STABIL.
On at stability 4.7.3
QTY.
Number of classes 4.8.
3 CLASS
3 classes 4.8.1*
5 CLASS
5 classes 4.8.2
INPUT
Parameter input 4.9.
WEIGHTS
Weight values 4.9.1*
PERC.TAG
Percentage values 4.9.2
PRINT
Automatic Printing 4.10.
manual
Off 4.10.1*
automat
On 4.10.2
)
฀ t To save the setting, press the
)
key.
( (
... t To exit setup: Press the
(
key several times.
Operating Instructions Combics Indicators 81
Operation