Sartorius CAIS1, Operating Instructions Manual

Page: 68 / 164

Entering the reference percentage value
The reference weight for 100% is entered using the keypad and the
O
key is
pressed to initialize the application.
Reading the reference percentage value
The reference weight can be read using a barcode scanner.
h The entered value remains active until deleted by pressing the
c
key or until
overwritten by a new value. It remains saved after the scale is switched off.
Preparation
t
Open the
APPLIC. / APPLIC.1 / PERCENT
menu
Available parameter settings * = Factory setting
MIN.INIT
Minimum load for initialization 3.6
1 digit
1 digit* 3.6.1
2 digit
2 digits 3.6.2
5 digit
5 digits 3.6.3
10 digT.
10 digits 3.6.4
20 digT.
20 digits 3.6.5
50 digT.
50 digits 3.6.6
100 diG.
100 digits 3.6.7
200 diG.
200 digits 3.6.8
500 diG.
500 digits 3.6.9
1000 dI.
1000 digits 3.6.10
RESOLUT
Resolution for calculation of reference value 3.9.
DISP.ACC
Display accuracy 3.9.1*
10 FOLD
Display ac 1 decimal place 3.9.2
100FOLD
Display ac 2 decimal places 3.9.3
DEC.PLCS
Decimal places in displayed result 3.10
NONE
None 3.10.1*
1 DEC.PL
1 decimal place 3.10.2
2 DEC.PL
2 decimal places 3.10.3
3 DEC.PL
3 decimal places 3.10.4
SAVE WT.
Parameter for saving weight values 3.11
STABIL.
With stability 3.11.1*
ACC.STAB
With increased stability 3.11.2
REF.WP
Reference weighing instrument 3.13.
NO WP
No weighing platform selected 3.13.1*
wp 1
Weighing platform WP1 3.13.2
wp 2
Weighing platform WP2 3.13.3
CALC.DIS
Display of calculated value 3.15.
RESID.QT
Residual quantity 3.15.1*
LOSS
Loss 3.15.2
)
t
To save the setting, press the
)
key.
( (
...
t
To exit setup: Press the
(
key several times.
Minimum load for initialization You can set the minimum load here, i.e. the load that must be placed on the
weighing platform in order to carry out the application. If the load on the platform
is too light, the following will occur:
– Error code
Inf 29
appears,
– The weighing platform is not initialized,
– The preset reference sample quantity is saved.
68 Operating Instructions Combics Indicators
Operation