Sartorius CAIS1, Operating Instructions Manual

Page: 138 / 164

138 Operating Instructions Combics Indicators
Menu Structure
DEC.PLCS
Decimal places in displayed result 3.10
NONE
None 3.10.1
1 Dec.Pl
1 decimal place 3.10.2
2 DEC.PL
2 decimal places 3.10.3
3 Dec.Pl
3 decimal places 3.10.4
SAVE WT.
Parameter for saving weight values 3.11
STABIL.
With stability 3.11.1*
ACC.STAB
With increased stability 3.11.2
REF.WP
Reference weighing instrument 3.13
NO WP
No platform selected 3.13.1*
WP 1
Weighing platform 1 3.13.2
WP 2
Weighing platform 2 3.13.3
CALC.DIS
Display of calculated value 3.15
RESID.QT
Residue 3.15.1*
LOSS
Calculation 3.15.2
Applic./Applic.2 off
Applic./Applic.2 CHECK. WG
Checkweighing
CHECK.RG
Checkweighing range 4.2
30-170%
30 to 170% 4.2.1*
10-MAX.L
10% to infi nity 4.2.2
CTRL.SET
Activate SET control output 4.3
OUTPUT
SET output 4.3.1*
OP.READY
Ready to operate (for process control systems) 4.3.2
OUTP.ACT
Activation of outputs 4.4
OFF
Off 4.4.1
ALWAY.ON
Always 4.4.2
STABIL.
On at stability 4.4.3
CHECK.RG
On within checkweighing range 4.4.4*
STAB.CHK
On at stability within checkweighing range 4.4.5
INPUT
Parameter input 4.5
TAR.MN.MX
Min, Max, target value 4.5.1*
TARG.PER
Only target value with percent limits 4.5.2
TAR.A.PER
Target value with asymmetrical percent limits 4.5.3
TAR.TOL.
Target value with relative tolerances 4.5.4
AUT.PRNT
Automatic printing 4.6
OFF
Off 4.6.1*
ON
On 4.6.2
OK
Only values within tolerance 4.6.3
NOT OK
Only values outside tolerance 4.6.4
APP.ZERO
Checkweighing toward zero 4.7
OFF
Off 4.7.1*
ON
On (
Y
symbol is displayed) 4.7.2
Applic./Applic.2 CLASS.
Classification
param.1
Parameter 1
min.init
Minimum load for application 3.6
1 digit
1 digit 3.6.1*
2 digit
2 digits 3.6.2
... see “
Weighing
"
1000 di.
1000 digits 3.6.10
param.2
Parameter 2
CTRL.SET
Activate SET control output 4.3
OUTPUT
SET output 4.3.1*
OP.READY
Ready to operate (for process control systems) 4.3.2
OUTP.ACT
Activation of outputs 4.7
OFF
Off 4.7.1
ALWAY.ON
Always 4.7.2
STABIL.
On at stability 4.7.3*
NUMBER
Number of classes 4.8
3 CLASS
3 classes 4.8.1*
5 CLASS
5 classes 4.8.2
INPUT
Parameter input 4.9
WEIGHTS
Weight values 4.9.1*
PERC.TAG
Percentage 4.9.2