Sanyo VPC-AZ1 Instruction Manual Download Page 23

Page: 23 / 144

Installing the batteries and card

(see pages 26, 27)

Insert the batteries.

Use the batteries recharged in step 1 above.

Make sure the polarity ((+) and (–)) of the batteries is as
indicated in the battery compartment.

1 Open battery compartment cover on the digital camera

bottom.

2 Insert the batteries.

3 Close the battery compartment cover.

4 Push the cover in the direction shown by the arrow until it

clicks.

Insert the card.

Make sure not to insert the card with it facing the wrong
direction.

1 Open the card slot cover.

2 Insert the card all the way.

3 Fold down the eject button.

4 Close the card slot cover.

After installing the card, be sure to first format it with the
digital camera (see page 124).

Eject
button

Card
slot
cover

SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001

English

Summary of Contents for VPC-AZ1

















































































































































Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands

Sanyo VPC-AZ1, Instruction Manual

Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands