Sanyo VPC-AZ1 Instruction Manual Download Page 105

Page: 105 / 144

Automatic playback (slide show)

You can play back the images automatically in a slide show fashion. If voice memos are attached,
they can also be heard.

Select the still image playback mode (see page 96).

An image appears on the LCD monitor.

If the Playback Setting Screen appears, press the MODE button to exit it.

If the Information Screen appears, press the MODE button to exit it.

Press and hold [

] or [

] on the arrow button until

“SLIDESHOW” appears.

The Slideshow Screen appears.

Select “TIME”, and turn the jog dial to select the time that
each image is shown. Select 1 sec., 4 sec., 7 sec. or 10
sec.
If 1 sec. is selected, any audio recording attached to the
image will not be played back.

Select “EFFECT”, and turn the jog dial to select one of
the wipe effects below.

OFF: The images change without any wipe effect.

: The new image replaces the previous image in a

“wipe” from top to bottom.

: The image changes from bottom to top.

: The image changes from the middle to the top and

bottom.

: The image changes in a mosaic pattern.

Select the START indicator, and press the SET button.

Slideshow playback begins.

To stop the slide show, press the MODE, SET, or arrow button.

“SLIDESHOW END” appears and automatic playback stops.

SLIDESHOW

SELECT

TIME 4S

EFFECT OFF
START

SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001

English

100

Summary of Contents for VPC-AZ1

















































































































































Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands

Sanyo VPC-AZ1, Instruction Manual

Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands