Sanyo VPC-AZ1 Instruction Manual Download Page 110

Page: 110 / 144

ENLARGING (ZOOMING IN) THE IMAGE

The saved images can be magnified for viewing during playback.

Display the image that you want to magnify.

See “PLAYING BACK STILL IMAGES” on page 98, “PLAYING BACK SEQUENTIAL
SHOTS” on page 102, or “PLAYING BACK VIDEO CLIPS” on page 103.

Press the zoom switch towards

The zoom mark

appears on the LCD monitor, and

enlargement is enabled.

To magnify the image, turn the jog dial.

The image is magnified, and the central portion of the
image is displayed.

To magnify: Turn clockwise.

To return to normal size: Turn counterclockwise.

You can use the arrow button to view different parts of
the enlarged image.

The maximum degree of magnification will depend on
the resolution of the original image.

resolution: up to 11 magnifications

resolution: up to 10 magnifications

resolution: up to 9 magnifications

resolution: up to 7 magnifications

resolution: up to 4 magnifications

resolution: up to 3 magnifications

resolution: up to 2 magnifications

You can press the shutter release button to save the magnified portion of the image being
displayed as a separate still image.

To reset to the normal display size, push the zoom switch towards

;

during the

magnification display mode.

When you have finished viewing the images, turn off the digital camera.

NOTE

As the image is enlarged, the quality will become rougher.

One scene (still image) of a video clip can be enlarged; however, a video clip cannot be played
while enlarged.

For

resolution, the maximum magnification is 51 times.

If the image has been rotated, it will be returned to its original orientation and then enlarged.

HELP

If “MEMORY FULL” appears when you try to save the magnified image

This indicates that there is not enough available memory to save the image. If you wish to save
the image, you must first erase some data in order to free some of the memory (see page 116).

ZOOM

SETTING
MOVE CURSOR

SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001

105

English

Summary of Contents for VPC-AZ1

















































































































































Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands

Sanyo VPC-AZ1, Instruction Manual

Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands