Sanyo VPC-AZ1 Instruction Manual Download Page 130

Page: 130 / 144

SETTING THE OPERATIONAL SOUNDS (BEEPS)

This setting allows you to set whether or not a beep sound is heard when the shutter release
button, SET button, or MODE button is pressed.

Display the Shooting Option Setting Screen (or
Playback Option Setting Screen) (see page 31).

Select “BEEP” and press the SET button.

The Beep Sound Setting Screen appears.

Select the desired setting and press the SET button.

To cancel the setting, press the MODE button. You
return to the screen in step 1.

ALL:

A beep is heard when any of the buttons is
pressed.

SHUTTER: A beep is heard when the shutter release

button is pressed.

OFF:

The beep sound is turned off.

This completes the beep sound setting.

The display returns to the Shooting Option Setting
Screen (or Playback Option Setting Screen).

NOTE

The beep volume cannot be adjusted.

AUDIO REC
CLOCK SET

BEEP

DISCHARGE
LANGUAGE
TV SYSTEM
REFORMAT

BEEP

ALL

SHUTTER

OFF

SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001

125

English

Summary of Contents for VPC-AZ1

















































































































































Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands

Sanyo VPC-AZ1, Instruction Manual

Search results

Summary of Contents for VPC-AZ1

Reviews:

Related manuals for VPC-AZ1

Brands by name

Popular brands