5
Press the SET button.
œ
You enter the preparation screen to record a voice memo.
6
Press the SET button.
œ
Voice memo recording starts. Talk into the microphone
on the digital camera. The sound will be recorded for
about 4 seconds. While the voice memo is being
recorded, “RECORDING” and
K
are displayed.
œ
When recording is finished, you return to the Edit Photo
Screen.
œ
To record voice memos for other images, press [
d
] or
[
c
], or turn the jog dial to select the desired image, and
repeat steps 5 and 6.
œ
To return to the Playback Setting Screen, press the
MODE button, or select
C
and press the SET button.
œ
For images with a voice memo added, the volume icon
N
is shown on the Playback Setting Screen.
œ
To listen to the voice memo, press the MODE button to
cancel the Playback Setting Screen, then press the SET
button.
œ
The playback volume can be adjusted with the procedure
described in page 98.
When you have finished adding voice memos, turn off the digital camera.
NOTE
œ
Voice memos can also be recorded when the image is captured (see page 78).
œ
After a voice memo has been added to an image, you cannot erase only the voice memo.
When the image is erased, the attached voice memo is also erased.
œ
If a voice memo is added to an image that already has a voice memo, the new recording will
replace the previous one.
HELP
If “MEMORY FULL” appears
œ
This indicates that there is not enough available memory to add a voice memo. If you wish to
add a voice memo, you must first erase some data in order to free some of the memory (see
page 116).
ADD AUDIO
RECORD
M
appears for images
with a voice memo.
Microphone
ADD AUDIO
RECORDING
REC (recording) indicator
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
English
110
Summary of Contents for VPC-AZ1
Page 144: ...SANYO Electric Co Ltd ...
