Sanyo SPW-CR365GX56 Technical Data Manual Download Page 113

Page: 113 / 345

- 67

Control of Mini ECO-i SYSTEM

5. Schedule Timer

Setting Errors

If time is set as shown below while setting up a program, “ERROR” is displayed (the

indication

blinks).

Therefore, correct the time setting.

If Program Times are the Same

Example of Time Settings That Do Not Cause Errors

The below time settings do not generate an error.

STEP 1

Every time the SET button is pressed, the setting mode switches between programmed operations of
the same time setting (

and

in the above example), therefore select the time setting to correct.

STEP 2

Change the time setting with the HH and MM buttons so that the times are no longer the same.

STEP 3

Press the SET button and check “ERROR” is not displayed.

STEP 4

Press the PROGRAM button to end the setting mode.

1) When ON and OFF times are staggered

2) When OFF time is earlier than ON time

06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 67

Summary of Contents for SPW-CR365GX56


























































































































































































































































































































































Search results

Summary of Contents for SPW-CR365GX56

Reviews:

Related manuals for SPW-CR365GX56

Brands by name

Popular brands

Sanyo SPW-CR365GX56, Technical Data Manual

Search results

Summary of Contents for SPW-CR365GX56

Reviews:

Related manuals for SPW-CR365GX56

Brands by name

Popular brands