Sanyo SPW-C0705DZH8, Technical Data Manual

Page: 17 / 703

(
1
~
40
)
Unit: mm
Unit: mm
Material 0
Copper tubing
Outer diameter 6.35 9.52 12.70 15.88
19.05 22.22
Wall thickness 0.8 0.8 0.8 1.0
1.15 1.0
Material
Copper tubing
Outer diameter 25.4 28.58 31.75 38.1
Wall thickness 1.0 1.0 1.1 1.15
41.28
1.20
Material 0
t1.0
t1.0
t0.8 t1.1
t1.0 t1.15
t1.0 t1.20
t1.15
*
Indoor unit type
7 9 12 16 18 25 30 36 48 60 76 96
*1 *1
Liquid tubing (mm)
Wide tubing (mm)
Narrow tubing (mm)
Distribution
joint–
solenoid valve
kit tubing
Solenoid valve
kit– Indoor
unit tubing
connection
*1:
26
56
128
185
259
366
*
Narrow tubing size Amount of refrigerant
charge/m (g/m)
Indoor Unit Tubing Connection
(
A
~
C
) Outdoor Unit Tubing Connection Size
ø15.88
ø12.7
ø9.52
ø12.7
ø6.35
ø9.52
ø15.88
ø19.05
ø15.88
ø9.52
ø19.05
ø9.52 ø9.52
ø22.22
ø9.52
ø19.05
ø22.22
For the solenoid valve kits, use type 160 with parallel specifications. Branch the tubing before and after the solenoid valve kits.
Required Copper Tubing Dimensions
Refrigerant tubing (Design pressure capability: 3.3 MPa)
When bending the tubes, use a bend-
ing radius that is at least 4 times the
outer diameter of the tubes.
In addition, take sufficient care to avoid
crushing or damaging the tubes when
bending them.
When bending the tubes, use a bending radius that is at least 4 times the outer diameter of the tubes.
In addition, take sufficient care to avoid crushing or damaging the tubes when bending them.
Material 1/2H • H
ø6.35
ø9.52
ø12.7
ø15.88
ø19.05
ø22.22
1/2 H, H
Tubing size (mm)
ø6.35
ø9.52
ø12.7
ø15.88
ø19.05
ø22.22
t0.8
t0.8
ø25.40
ø28.58
ø31.75
ø38.10
ø41.28
Suction tubing (mm)
Discharge tubing (mm)
2-7
Design of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
1. Model Selecting and Capacity Calculator
TD831143-00̲W-3WAY.indb 7 TD831143-00̲W-3WAY.indb 7 2008/12/01 16:15:41 2008/12/01 16:15:41