27
RECORD settings
Press the MENU button and enter the password. (P24)
The MAIN MENU is displayed, select "
RECORD
" using the
control button (
{|}~
).
To set the resolution for the recordings.
Select RESOLUTION using the control button (
{|
) and
select a setting using the control button (
}~
).
FULL:
When recording single-screen
QUAD:
When recording quad-screen
To set the recording settings of each channel.
Select an item for each setting using the control button
(
{|
) and select a setting value using the control button
(
}~
).
●
Setting a CHANNEL
Select CHANNEL and select a channel.
CH1/CH2/CH3/CH4
●
Setting the FRAME RATE (Unit: FPS)
Select FRAME RATE and select a value.
NTSC:
OFF/1/2/ ... 29/30 (f/s)
PAL:
OFF/1/2/ ... 24/25 (f/s)
If FULL is selected under resolution setting:
NTSC:
It is possible to select up to a total of 30 frames for all
channels
PAL:
It is possible to select up to a total of 25 frames for all
channels
If QUAD is selected under resolution setting:
NTSC:
It is possible to select up to a total of 120 frames for
all channels
PAL:
It is possible to select up to a total of 100 frames for all
channels
●
Setting the QUALITY
To select QUALITY and select the video quality.
Selections:
NORMAL/FINE/BASIC
●
Setting the RECORDING
To select RECORDING and select the recording mode.
CONTINUOUS (P13)
Recording is performed while this unit is turned on.
BY MOTION recording (P13)
Recording is performed as soon as the internal motion sensor
of this unit reacts.
BY EXT. SENSOR (P14)
Recording is performed as soon as a sensor device
connected to the external sensor (SENSOR) terminal device
of this unit reacts.
BY SCHEDULE (P15)
Recording is performed daily during the set time slot set on
the SCHEDULE screen in the recording settings.
RECORD
RESOLUTION
QUAD
CHANNEL
CH1
FRAME RATE
1
f/s
QUALITY
NORMAL
RECORDING
CONTINUOUS
MOTION ZONE
FULL ZONE
MOTION SENSITIVITY
7
SENSOR TYPE
---
PRE RECORD
ON
POST EVENT RECORD
5 SECONDS
ALARM
OFF
ALARM DURATION
5 SECONDS
AUDIO
OFF
TIMER SET
MAIN MENU
RECORD
LIVE
SYSTEM
HDD SET
NETWORK
SERVICE
A
Setting the RESOLUTION
•
NTSC:
720 × 480
•
PAL:
720 × 576
•
NTSC:
360 × 240
•
PAL:
360 × 288
B
Setting a CHANNEL
The FRAME RATE setting represents the total frame rate
of each channel. For example, if the frame rate is set to
25 (30) for channel 1 it cannot be set differently for other
channels.
