Sanyo DSR-2004, Instruction Manual

Page: 22 / 64

Recording
13
1
Recording starts automatically when this unit is
turned on.
" C " is displayed on the screen. The connected cameras
are simultaneously recorded.
The recording mode can be changed using
RECORDING under RECORD settings. Settings, such
as image quality, can also be set. (P27)
2
To stop recording, select RECORDING under
RECORD settings using the control button (
{|
)
and select "DISABLE" using the control button
(
}~
).
“ C ” disappears.
A motion sensor can be set for each channel.
1
Adjusting the following settings using the control
button (
{|}~
).
2
Select RECORDING using the control button (
{|
)
and select BY MOTION using the control button
(
}~
).
3
Select MOTION ZONE using the control button
(
{|
) and select the PARTIAL ZONE using the
control button (
}~
), press the ENTER button.
The motion setting screen is displayed.
4
Select the sensor detection position using the
control button (
{|}~
) and press the ENTER
button.
The frame set for the sensor detection is grainy.
Select a sensor detection position by repeating the
operation.
5
Select MOTION SENSITIVITY using the control
button (
{|
) and select the level of sensitivity
using the control button (
}~
).
Selections: 1-9 (Low sensitivity)
6
Select PRE RECORD using the control button (
{|
)
and select the pre recording as necessary using the
control button (
}~
).
7
Select POST EVENT RECORD using the control
button (
{|
) and select the recording time as
necessary using the control button (
}~
).
Selections: 2 - 30 SECONDS
8
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live video.
B
CONTINUOUS recording
C
BY MOTION recording
• RESOLUTION
• CHANNEL
• FRAME RATE
• QUALITY
CH1 C
CH3 C
CH2 C
CH4 C
2006/07/14 09:04:54 2% 2%
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1 f/s
QUALITY NORMAL
RECORDING DISABLE
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
• PARTIAL ZONE • FULL ZONE
If FULL ZONE is selected, the motion setting screen is
not displayed. Only set the level of sensitivity for MOTION
SENSITIVITY.
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1
f/s
QUALITY NORMAL
RECORDING BY MOTION
MOTION ZONE PARTIAL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
Detection
frame