Sanwa MT-44, Manual

Page: 53 / 68

５１ ５２
Usa
ge of eac
h feature
Usage of ea
ch feature
SYSTEM MENU
SYSTEM
●A feature for setting system of the transmitter, such as BIND, KEY ASSIGN, BUZZER, BATTERY, LCD
and VR ADJUST (Volume adjustment).
Positions of the Switch and Trim
KEY ASSIGN TRIM
ENTER BACK
ENTER BACK
●You can change the setting value of each feature with Trim1 - Trim4.
●You can also change the setting of the variation change in one time of Trim operation
with the STEP setting and the direction of the action with the REV setting.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [KEY ASSIGN] with the multi-selector, switch to
[TRIM] with the Select button, select an item to set and
determine with the Enter operation.
3)Setting Trim (TRM1/TRM2/TRM3/TRM4)
Select [TRIM] to change the setting and set a feature to
assign with the multi-selector.
○Setting range:
○Default TR1
：
TRM-ST
TR2
：
TRM-TH
TR3
：
D/R-ST
TR4
：
D/R-BR
4)Setting Step (STEP)
Set the variation of the movement by one-time Trim operation.
Select [STEP] with the multi-selector, determine with the
Enter operation and set the variation.
○Setting Range: 1
～
100
○Default: 5
5)Setting the Direction of Action
Set the direction of action when operating Trim.
Select [REV] with the multi-selector, determine with the
Enter operation and set the direction of action.
○Setting Rage: NOR/REV
○Default: NOR
Features assgined to the Switch and
Trim at the factory
TR1
：
Steering Trim(TRM-ST)
TR2
：
Throttle Trim(TRM-TH)
TR3
：
Dual Rate ST(D/R-ST)
TR4
：
Dual Rate BR(D/R-BR)
SW1
：
Timer (TIMER)
SW2
：
CUSTOM
OFF
、
ASIST-ST
、
D/R-ST
、
D/R-TH
、
D/R-BR
、
CUR-ST
、
CUR-TH
、
SPD-ST
、
SPD-TH
、
ALB
、
OFFSET
、
AUX1
、
AUX2
、
TIMER
、
TE-CLR
、
LOGGER
、
R-MODE
SW1
SW2
SWITCH An assignable feature
○Default: TRIM-1
：
Steering Trim(TRM-ST)
TRIM-2
：
Throttle Trim(TRM-TH)
TRIM-3
：
Steeering Dual Rate(D/R-ST)
TRIM-4
：
Brake Dual Rate(D/R-BR)
OFF
、
TRIM-ST
、
TRM-TH
、
TRIM-A1
、
TRIM-A2
、
D/R-ST
、
D/R-TH
、
D/R-BR
、
CU-R-ST
、
CU-R-TH
、
CU-R-BR
、
SP-ST-F
、
SP-ST-R
、
SP-TH-F
、
SP-TH-R
、
ALB-PO
、
ALB-ST
、
ALB-LG
、
ALB-CY
、
OFFSET
、
AUX1
、
AUX1(CODE1
～
10)
、
AUX2
、
AUX2(CODE1
～
10)
KEY ASSIGN SWITCH [KEY ASSIGN SW]
●You can assign features to the switches (SW1, SW2, SW3) of the transmitter
and toggle ON/OFF of the features during operation.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [KEY ASSIGN] with the multi-selector and
determine with the Enter operation.
3)Setting the Switch (SW1/SW2)
Operate the Enter with [SW] and set the feature to
assign to the switch with Up key/Down key.
○Setting range:
○Default : SW1: TIMER SW2: OFF
*BY Setting [ASSIST-ST] onto SW1/SW2,
you can turn ON/OFF the feature of D/R, SPEED
and CURVE that can be set onto the steering.
4)Setting Mode
It sets the switch performance but there are cases
that youcannot set depending on the feature to assign.
○Setting range:
TOGGLE (Switching between ON/OFF when pressed every time )
PUSH (ON only during being pressed)
TRIM 1
TRIM 2
TRIM 4
SWITCH 2
TRM 3
DIAL
PUCH SWITCH 1
An assignable feature
Usage of each feature
TRIM
TRIM1
TRIM2
TRIM3
TRIM4