Sanwa MT-44, Manual

Page: 19 / 68

Push
１７ １８
About Short Cut Menu
Quick Setup <QUICK SETUP WIZARD>
Usage of each feature
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
● Quick Setup
1) Turn the power switch on while doing Enter operation
2) Quick Setup screen is displayed.
As you do Enter operation, Quick Setup Wizard is
launched.
3) When the screen is changed to Model selection screen,
select a Model to set up by using Multi-Selector.
When a Model to set is selected, set with Enter operation.
4) When the screen is changed to Car Type selection
screen, select a Car Type using Multi-Selector.
When a Car Type is selected, set with Enter operation.
Setting up Type
○ Setting range: EP CAR STANDARD
EP CAR (LED UNIT)
EP CAR (SVZ)
EP CAR (SVD)
GP CAR STANDARD
1/5 GP CAR DUAL BR1
1/5 GP CAR DUAL BR2
CRAWLER 4WS/MOA
○ Default: EP CAR STANDARD
*Channel operation of each type will be as follows.
*Select a type to be used according to an RC.
Holding
⇒
Power Switch
ON
ENTER BACK
ENTER BACK
ENTER BACK
ENTER BACK
Channel operation specifications for each Type
EP CAR
STANDARD GP CAR
STANDARD 1/5 GP
DUAL BR1 1/5 GP
DUAL BR2 CRAWLER
4WS/MOA EP CAR
(LED UNIT) EP CAR
(SVZ) EP CAR
(SVD) TYPE
CH
STEERING
ESC
THROTTLE
/BRAKE
THROTTLE
/BRAKE R
STEERING STEERING STEERING STEEIRING
ESC ESC ESC
ESC
F
ESC
R
STEERING
THROTTLE
AUX1
AUX2
AUX1
AUX2
LED-ST
BRAKE F LED-TH
CODE1
CODE2
CODE1
CODE2
STEERING
1 STEERING
F
STEERING
2 STEERING
R
BRAKE
R
BRAKE
F
CH1
CH2
CH3
CH4
5) When deciding the car type using Enter,
the screen changes to Initialization (Model Initialization) screen.
Do initialization following the message.
6) When initializing (Initializing Model) is completed, the scr
een
changes to RF Mode Selection Screen. Set RF Mode by using
Up key/Down key and finalize with th
水
Enter key for the
receiver to be used.
○ Setting range: FH4T/FH3
○ Default: FH4T
・
Compatible Receivers:
FH4T: RX-482, RX-481, RX-472, RX-471,
RX-47T, RX-462, RX-461,
SV-Plus Series
7) Once RF Mode for the receiver is determined, the screen
changes to the Response Mode screen.
Set Response Mode according to the servos and the equipmen
t
to be used.
Set with Up key/Down key and finalize with the Enter key.
○ Setting range: NOR (Normal/Analog Servos)
SHR (High Response/Digital Servos)
SSR (Super Response/SRG Servos)
○ Default: NOR (Normal/Analog Servos)
8) When Response Mode setting is completed,
the screen changes to BIND Set up Screen.
Follow the screen message and start Binding.
9) When Binding (BIND) is done, the screen changes to
the Base Set Up screen. Complete setting for each channel
(refer to P. 25-28).
10) When Base setting is done, Set Up Wizard will end.
If you press the Enter button, the screen changes to the
Top screen.
ENTER BACK
ENTER BACK
ENTER BACK
ENTER BACK
● Please note that the analog servos do not work in SHR/SSR modes. If you mistakenly use the analog servos in SHR/SSR mdoes,
it does not work normally and the servos will be broken. Never use analog servos in SHR/SSR modes.
For digital servos (SRG, ERB, ERS Series and Digital ERG Series), either NOR or SHR mode works.
● SSR mode works only for SRG Servos, SUPER VORTEX/S V -PLUS series, H V -12, STOCK SPECIAL and H V-01.
● M T -44 will not be SSR mode by using RX-451R to BIND with SHR displa y. It works as the display shows.
● With SHR/SSR mode, B L-RACER, BL-FORCE, F2000, F2200. F3000 F3300, SBL-01 02 and 03CL do not work.
Make sure to use them in NOR mode.
● S V -08, H V -10, H V -12 and F2500 work in NOR/SHR modes.
Important
FH3: RX-451R, RX-451, RX-381, RX-380