Sanwa MT-44, Manual, Page: 34 / 68

３３ ３４
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
AUX
STEP AUX
AUX
AUX
● AUX is a feature to set the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP),
POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase). MOA (Motor On Axle), AUX-MIX
(AUX Mixing: ST à AUX/TH-AUX) and CODE5/CODE10 (Code Communication).
*Setting of AUX TYPE is done in the System Menu. Make a setting according to the purpose of the use.
● Setting Step AUX allows you to set the operating quantity by operating assigned T rim or a switch.
● By factory default, the AUX feature is set to the Step AUX.
1) Select [AUX] with the multi-selector and define with the Ente
r
operation.
2) Setting Step AUX (STEP AUX)
Determine [CH] to activate with the Select button and set the
position of the motion with the multi-selecto r.
*Operating quantity can be set with EPA
(End Point Adjustment, P.27, 28).
*Assign the features to T rim and Dial with Key
Assignments according to the used method.
Motion Position Display
Secreting a Channel with the Select Button
ENTER BACK
ENTER BACK
ENTER BACK
POINT AUX
AUX
●By setting Point AUX and assigning the movement of AUX1/AUX2 (3ch, 4ch) to the switch and Trim, you can
move the servo to the set Point.
The Point that moved can be set with EPA (End Point Adjustm ent).
Adjust the Point position according to the usage.
* Amount of Points will be 2 ~ 6 points and can be set with AUX T YPE.
1) Select [AUX] with the multi-selector and set with AUX TYPE.
2) Setting Point AUX (POINT AUX)
Determine [CH] to activate with the Select button and set
the Point of the motion with the multi-selecto r.
*Set to [POINT AUX] with (AUX TYPE) of (SYSTEM) according to
the usage.
*Assign the features to Dial and T rim with Key Assignments to
operate or operate with the multi-selecto r.
ENTER BACK
●With the operation of assigned T rim or Switch, control the motion of the 4 Wheel Steering.
1) Select [AUX] with the multi-selector and define with the Ente r operation.
2) Setting Operating Mode
Set the Operating Mode of 4WS with the multi-selecto r.
Set the Operating Mode according to the usage.
* When using during operation, assign the feature of the
Operating Mode to T rim or the switch.
Motor On Axle [MOA] (Front-Rear Wheel Separate Drive)
AUX
●By setting Motor On Axle (MOA], you can adjust the drive ratio of front and rear wheels of a front-rear dual
motor car.
1) Select [AUX] with the multi-selector and define with the Ente r
operation.
2) Setting Operating Mode
Set the Operating Mode of MOA with the multi-selecto r.
*Adjust Step setting to change the drive distribution of front- rear
with [MODE] of [AUX TYPE] of [SYSTEM].
*When using, assign the features to Dial or T rim or operate with
the multi-selector.
*Connect the speed controller for controlling the rear motor to
the channel (AUX1/AUX2) that is set to MOA.
NOR
REV
R-ST
F-ST
Servo Motor
Switching the Operation Mode
By changing the ratio, you can adjust the gear ratio of front-rea r.
Steering the Motion Image
MOA Motion Image
<L Side Operation> <Neutral> <R Side Operation>
<L Side Operation> <Neutral> <R Side Operation>
Front Drive
Rear Drive
Front Drive
Rear Drive
Front Drive
Rear Drive
<L Side Operation> <Neutral> <R Side Operation>
<L Side Operation> <Neutral> <R Side Operation>
Front-rear drive ratio
Servo Motor
Usage of each feature
4-Wheel Steering