Sanwa MT-44, Manual

Page: 39 / 68

Function LED
X Illumination
LED flashes while the timer is activated.
SWITCH1
３７ ３８
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
● You can measure and record each lap up to 999 laps (works for all models).
● Pre Alarm (PRE-ALM) is installed and the alarm goes off before the goal.
1) Select [TIMER] with the multi-selector and determine with th e
Enter operation.
2) Starting the Timer
As a default, the timer switch is set to SW1. By holding S W1,
the timer becomes a standby state for starting and by eith er
pressing SW1 again or operating the throttle trigge r ,
measuring starts.
3) Every time you operate SW1, lap time is measured.
The switch does not work for 3 seconds after operating SW1 .
4) Completing measuring
By holding SW1, measuring will be completed.
*Y ou can check the measured lap time on the LAP TIMER screen.
When Enter is being operated while the lap timer is activa ted/
stopped on the LAP TIMER screen, the screen is changed to the
lap time displa y . Y ou can check each lap time with the multi-
selector operation (not possible on the SETUP screen).
*When turning the power switch off while the timer is activated,
the timer will be reset.
*When the timer is set to SW1/SW2, the timer will be in the standby
mode by holding the switch even on a screen other than the
setting screen.
ENTER BACK
ENTER BACK
SETUP
TIMER
TIMER
LAP TIMER
TIMER
● It has three timer features including Lap Time r , Interval Timer and Down Time r.
● When selecting a timer and operate the Select button, you can toggle between the timer screen and the setting screen.
* When a timer is activated, X Illumination and Function LED fla sh.
● Y ou can check the lap time measured on the LAP TIMER screen.
● When Enter is being operated while Lap Timer is activated/not activated,
the screen is changed to the Lap Time display .
Y ou can check each lap time with the multi-selecto r.
● Make all settings of the timers with the Setup Menu.
1) Setting TYPE
Select [TYPE] with the multi-selector to do setting.
○Setting range: LAP/INT/DOWN
○Default: LAP
• LAP: Possible to measure and record each lap up to 999 laps
(for all models)
• IN T : The timer is activated at the set time.
• DOWN: It can be a guideline for calculating running time and
the fuel cost of a GP ca r.
2) Setting GOAL TIME
By setting a goal time, the Alarm is activated.
○Setting range: 00: 00 ~ 99: 59 (00: 01 unit)
○Default: 5: 00
3) Setting INTER V AL
The Alarm is activated at the set time (It tells you the l ap time).
○Setting range: 00: 00 ~ 99: 59 (00: 01 unit)
○Default: 01: 00
4) Setting LAP NA VI
It activates the alarm at the set time at the time of runn ing and
uses it as a guideline for the goal time.
〇
Setting range: 00
：
00
．
01s
～
99
：
5 9
．
99
〇
Default: --
：
--
．
--
*LAP NAVI will not start at 00 : 00. 00.
5) Setting S T ART
Set the Timer Start from the T rigger Interlock/Switch/Random.
○Setting range: TRIGGER/SW/RANDOM
○Default: TRIGGER
6) Setting DA T A-LOG
It sets T elemetry Data Log (record) along with the time r.
*Log starts along with the timer feature.
⇔
⇒
<LAP TIMER Screen> <SETUP Screen>
ENTER
Select Button
Select Button
BACK
ENTER BACK
Usage of each feature
○Setting range: OFF/ON
○Default: OFF