Sanwa MT-44, Manual

Page: 24 / 68

２３ ２４
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
[ST]
Steering Adjustable Rate Control
CURVE
SETTING
● You can change the steering feature from Mild to Linear and to Q uick. In general, if you find your RC car
oversteering, change the setting to the minus side and if you find understeering, change to the plus side.
Steering Adjustable Rate Control is a simultaneous setting for L and R.
1) Select ST with the Select button and set CURVE TYPE of ST to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range:
－
100%
～
100%
○Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector and
adjust the setting value.
○Setting range: 5%
～
95%
○Default: 0%
* When cancelling a selected feature, use the Back button.
AUX1 Adjustable Rate Control
● Y ou can change the AUX1 performance feature from Mild to Linear and to Quick.
Y ou can set the High side and the Low side separatel y.
*When setting AUX1 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX1 with the Select button and set
CURVE TYPE of AUX1 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range: -100%
～
100%
○Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setti
ng value.
○Setting range: 5%
～
95%
○Default: 0%
*When cancelling a selected feature, use the Back button.
[TH]
Throttle Adjustable Rate Control
● You can change the throttle feature from Mild to Linear and to Q uick. In general, when operating
on a slippery road or if you find over powering, change the setting to the minus side and when
operating on a high-grip road or if you find lack of power in the power unit, change to the plus side.
Y ou can set the High side and the brake side separatel y.
*Selection of the High side and the brake side is done by trigg
er operation.
1) Select TH with the Select button and set
CURVE TYPE of TH to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and adjust
the setting value.
○Setting range:
-
100%
～
100%
○Default: 0
％
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○Setting range: 5%
～
95%
○Default 50%
* When cancelling a selected feature, use the Back button.
Point Setting Position
Select H/B by trigger operation.
AUX2 Adjustable Rate Control
● Y ou can change the operation feature of AUX2 from Mild to Linear and to Quick.
Y ou can set the High side and the Low side separatel y.
*When setting AUX2 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX2 with the Select button and set
CURVE TYPE of AUX2 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range: -100%
～
100%
○Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the sett
ing value.
○Setting range: 5%
～
95%
○Default: 0%
*When cancelling a selected feature, use the Back button.
Point Setting Position
Steering Operation Position
Usage of each feature
Point Setting Position
[AUX1]
[AUX2]