Sanwa MT-44, Manual

Page: 58 / 68

Function LED
５７ ５８
Usage of each feature
usa
ge of ea
ch function
SYSTEM MENU
SYSTEM
CLOCK
ENTER BACK
●A menu to control the calendar and the clock display on the top screen and the time used.
●There are resettable [ON TIME1] that is a guideline for replacing and recharging the batteries
and [ON TIME2] that is a guideline for overhaul of the main body unit.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [CLOCK] with the multi-selector and determine
with the Enter operation.
3)Set the CLOCK feature with the multi-selector.
Because setting the clock is necessary for managing
log data, make sure to set the calendar and the clock.
LCD
●You can set LCD (Liquid Crystal) contrast (intensity), brightness and lighting mode (lighting time) of Back
Light.
1)Select [SYSTEM] with the multi-selector and determine with the Enter
operation.
2)Select [LCD] with the multi-selector and determine with the Enter
operation.
3)Set LCD (Liquid Crystal) contrast (intensity), brightness and
lighting mode (lighting time) of Back Light.
*In some contrast, you may not see screen display.
○ Setting Items: CONTRAST (Intensity of Liquid Crystal)
BRIGHT (Brightness of Liquid Crystal)
LIGHTS-MODE (Backlight Lighting Mode)
LIGHT-TIME (Backlight Lighting Time)
○ Setting range: CONTRAST
：
0
～
30
BRIGHT
：
0
～
10
LIGHT-MODE
：
OFF/KEY-ON/ALWAYS
LIGHT-TIME
：
1
～
30sec
○Default : CONTRAST
：
10
BRIGHT
：
5
LIGHT-MODE
：
KEY-ON
LIGHT-TIME
：
10sec
ENTER BACK
LED
● A feature to adjust the operating mode and brightness of the function LED installed on the transmitter body.
1)Select [SYSTEM] with the multi-selector and determine with
the Enter operation.
2)Select [LED] with the multi-selector and determine with
the Enter operation.
3)Set the operating mode and brightness of the Function LED.
○ Setting Items MODE (Operating Mode)
BRIGHT (Brightness of LED)
○Setting Range MODE
：
ALWAYS/WAVE/OFF
BRIGHT
：
0
～
5
*BRIGHT is only for setting ALWAYS
○Default MODE
：
WAVE
BRIGHT
：
5
ENTER BACK
Function LED
Function LED
SETUP
●Select a language for the screen display during setting up and set up the unit of the temperature display
for Telemetry data and the opening logo display when the power
switch is turned on.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [SETUP] with the multi-selector and determine with
the Enter operation.
3)Select items to set with the multi-selector and adjust.
○Setting Items
LANGUAGE (Display Language)
：
ENG/JPN
UNIT (Unit of the temperature for Telemetry)
：
C/ F
BOOT (Opening logo when the power switch is turned on)
：
DEMO/NONE
RESUME (Resume)
：
OFF/ON
○Default
LANGUAGE
：
ENG
UNIT
：
C
BOOT
：
DEMO
RESUME
：
OFF
*When Resume is set to ON, it memorizes the menu at the time when power is turned off.
ENTER BACK
usa
ge of ea
ch function