Sanwa MT-44, Manual

Page: 44 / 68

４３ ４４
Usa
ge of e
ach
featur
e
Usage of e
ach
fea
tur
e
TELEMETRY SETTING
LOGGER
TELEMETRY
GRAPH SETTING
TELEMETRY
●Set each feature of T elemetr y . Select the feature to set with the select button.
・
TLM1/TLM2: Setting the T elemetry Data of T emperature/Speed
[NAME] Up to 3 characters of data names of TLM1/TLM2 are changeable.
[UNIT] Setting the T emperature and changing the Speed displa y .
(C/ F/KM [Speed unit is changeable])
[MAX] Setting the graphʼs maximum value when displaying the data as a
graph.
[ALERT] Activates the alarm at the set temperature.
(*It cannot set for displaying the speed.)
[MIN] Setting the graphʼs minimum value when displaying the data as
a graph.
・
RPM: Setting the Speed figured from the number of rotation data
[UNIT] Switching the number of rotation and the speed display
(RPM, km/h, mph)
[MAX SCALE] Setting the graphʼs minimum value when displaying
the data as a graph.
・
RATIO: When setting RATIO RPM sensor in the subtracted position,
you can display the number of rotations of the motor and e ngine after
calculating backward by setting RATIO.
○Setting range: 00.001
～
64.999
○Default: 01.000
・
10COUNT DIS T
：
When setting to [10 Count Distance] Speed displa y ,
the RPM sensor measures the moving distance that
has been detected 10 times, calculate the speed and
displays it by setting the value.
○Setting range: 1cm
～
255cm
○Default: 30cm
・
VO LT : Alarm is activated at the set voltage corresponding to the
T elemetry Data and LED flashes.
[MAX VO L T] Setting the maximum temperature
○Setting range: 3.0V
～
9.0V
○Default: 9.0V
[ALERT VO L T] Setting the Alarm Activation V oltage
○Setting range: 3.0V
～
9.0V
○Default: 3.8V
1) Select [LOGGER] with the multi-selector and determine with the
Enter operation.
2) Select [TELEMETRY SE T TING] with the multi-selector and
determine with the Enter operation.
3) Select the features to set with the Select button and adjust
various settings with the multi-selector.
●A feature to select 3 items to be displayed in a graph when displaying T elemetry data as a graph.
1) Select [TELEMETRY] with the multi-selector and determine with the
Enter operation.
2) Setting GRAPH SE T TING
Select [GRAPH SE T TING] with the multi-selector and determine
with the Enter operation.
○Setting range: TL1/TL2/RPM/VO L T/ST/TH
TLM1/2: T elemetry Data
RP M
：
RMP: Rotation Number Data
VO LT : Receiver Input V oltage
○Default: LINE1: ST (Steering Data)
LINE2: TH (Throttle Data)
LINE3: VO L T (Receiver Input V oltage)
*In a graph, LINE1 is displayed in black, LINE2 in dark grey
and LINE3 in light gre y.
TELEMETRY SWITCH
TELEMETRY
●A feature that allows you to activate the switch with the Telemetry data based on the change of the same data.
• TRIGGER: Selects the data that will be the source of the swit
ch operation.
• BORDER: A setting for operation standards of temperature or v
oltage.
• FUNCTION: Assigns functions.
1)Select [TELEMETRY] with the multi-selector and determine with
the Enter operation.
2)Setting TELEMETRY SWITCH
Select [TELEMETRY SWITCH] with the multi-selector and determine
with the Enter operation.
○Setting range: TRIGGER: OFF/TL1/TL2/VO L T
BORDER: When setting temperature, 0 ~ 150C
When setting voltage, 3.0 ~ 9.0V
FUNCTION
：
TIMER ON/OFF
RACING MODE
TH RATE
MODE
：
TOGGLE/ONE SHOT
○Default: TRIGGER
：
OFF
BORDER
：－－－
(OFF)
FUNCTION
：－－－
(OFF)
MODE
：－－－
(OFF)
ENTER BACK
ENTER BACK
ENTER BACK
ENTER BACK
⇒
SELECT BUTTON
⇒
SELECT BUTTON
⇒
SELECT BUTTON
Usage of each feature
〇