Sanwa Gemini X Operating Manual Download Page 54

Page: 54 / 56

Page 54

inDEX

Servo Sub-Trim - Steering, Adjusting 34

Servo Sub-Trim - Throttle, Adjusting 35

Servos, Using Analog and Digital 5

Setup Menu, Accessing 38

Setup Menu Icon, Definition of 50

Setup Menu Icon, Diagram of 11

Setup Menu, Menu Options 13

Specifications, Transmitter and Receiver 5

Steering Control Stick, Adjusting Spring Tension 8

Steering Dual Rate, Assigning to TRM Switch 16

Steering Dual Rate, Centering the Steering Servo and Wheels 15

Steering Dual Rate, Definition of 50

Steering Dual Rate, Overview 14

Steering Trim Switch, Definition of 8

Steering Trim Switch, Diagram of 6

Steering Control Stick, Definition of 8, 50

Steering Control Stick, Diagram of 6

Step Auxiliary, Activating and Using 25

Step Auxiliary, Assigning to TRM Switch 26

Step Auxiliary, Choosing Step Values 25

Step Auxiliary, Definition of 50

Step Auxiliary, Overview 25

Step Value.

See Also

Trim Step Resolution

Step Value, Definition of 50

Suppression Capacitor.

See

Receiver, Precautions

Suppression Capacitor, Definition of 50

Tandem Steering.

See Also

Four Wheel Steering Mixing, Activating and Using

Tandem Steering, Definition of 50

Throttle Hold, Front.

See Also

Motor on Axle Mixing, Activating and Using

Throttle Hold, Rear.

See Also

Motor on Axle Mixing, Activating and Using

Throttle Control Stick, Definition of 8, 51

Throttle Control Stick, Diagram of 6

Thottle Control Stick, Adjusting Spring Tension 8

Throttle Trim Switch, Definition of 8, 50

Throttle Trim Switch, Diagram of 6

Top Menu Icon, Definition of 50

Top Menu Icon, Diagram of 11

Transmitter and Receiver Binding 14, 39

Transmitter, Battery Options 9

Transmitter - Battery Plug, Diagram of 10

Transmitter - Nominal Input Voltage, Specification 5

Transmitter, Installing Batteries 9

Transmitter, Precautions 4

Transmitter, Using Li-Po or Li-Fe Batteries 9, 10

Transmitter, Using Ni-Cd or Ni-MH Batteries 9

Trim Step Resolution, Changing 41

Trim Step Resolution, Definition of 50

Trim Step Resolution, Overview 41

Trim (TRM) Switch Assign, Assigning Functions 40

Trim (TRM) Switch Assign, Definition of 50

Trim (TRM) Switch Assign, Functions List 40

Trim (TRM) Switch Assign, Overview 40

Trim (TRM) Switch, Changing Step Resolution 41

Voltage Indicator. See also Digital Voltage Indicator

Weight - Receiver, Specification 5

Weight - Transmitter, Specification 5

Z-Connector, Diagram of 6

Summary of Contents for Gemini X

























































Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands

Sanwa Gemini X, Operating Manual

Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands