Sanwa Gemini X Operating Manual Download Page 53

Page: 53 / 56

Page 53

inDEX

Motor on Axle Mixing, Definition of 49

Motor on Axle Mixing, Overview 28

Multi-Function LCD, Definition of 8, 49

Multi-Function LCD, Diagram of 6

Multi-Function LCD, Overview 11

Neck Strap Anchor, Definition of 8

Neck Strap Anchor, Diagram of 6

Nominal Input Voltage - Receiver, Specification 5

Nominal Input Voltage - Transmitter, Specification 5

Ni-MH Battery, Using 9

Operating Voltage, Definition of 49

Output Power, Definition of 49

Output Power - Transmitter, Specification 5

Packaging 2

Parallel Steering.

See Also

, Four Wheel Steering Mixing, Activating and Using

Parallel Steering, Definition of 49

Peak-Detection Charger, Using with Transmitter 9

Point Auxiliary, Activating and Using 24

Point Auxiliary, Assigning to TRM Switch 24

Point Auxiliary, Choosing Points 23

Point Auxiliary, Choosing Point Values 24

Point Auxiliary, Definition of 49

Point Auxiliary, Overview 23

Power Indicator Light, Definition of 8, 49

Power Indicator Light, Diagram of 6

Power Switch, Definition of 8, 49

Power Switch, Diagram of 7

Precautions, Receiver.

See Also

Receiver, Precautions

Precautions, Transmitter.

See Also

Transmitter, Precautions

Programmable Trim Switch.

See Also

Trim (TRM) Switch

Programmable Trim Switch, Definition of 8, 50

Programmable Trim Switch, Diagram of 6

Programming Keys, Definition of 8, 50

Programming Keys, Diagram of 6

Programming Keys, Overview 11

Programming Keys, Shortcuts 12

Programming Menu, Menu Options 13

Programming Toggle Switch, Definition of 8, 50

Programming Toggle Switch, Diagram of 6, 7

Programming Window, Definition of 50

Programming Window, Diagram of 11

Rear Wheel Steering.

See Also

Four Wheel Steering Mixing, Activating and Using

Receiver Battery Voltage Fail Safe, Definition of 50

Receiver Battery Voltage Fail Safe, Using 33

Receiver, Connections and Mounting 10

Receiver - Nomial Input Voltage, Specification 5

Receiver, Precautions 4

RF Exposure Statement 3

Right Menu Key, Definition of 50

Right Menu Key, Overview 11

Safety 3

Servo Reversing - Auxiliary Channel 3, Changing 37

Servo Reversing, Definition of 50

Servo Reversing, Overview 36

Servo Reversing - Steering, Changing 36

Servo Reversing - Throttle, Changing 36

Servo Speed, Definition of 50

Servo Speed, Overview 20

Servo Speed - Steering, Adjusting 20

Servo Speed - Throttle High, Adjusting 21

Servos, Recommendations 5

Servo Sub-Trim - Auxiliary Channel 3, Adjusting 35

Servo Sub-Trim, Definition of 50

Servo Sub-Trim, Overview 34

REFERENCE

Summary of Contents for Gemini X

























































Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands

Sanwa Gemini X, Operating Manual

Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands