Sanwa Gemini X Operating Manual Download Page 12

Page: 12 / 56

Page 12

PROgRaMMing kEY anD TOggLE SwiTcH SHORTcUTS

LcD anD PROgRaMMing kEYS

The Programming Keys and Toggle Switches can be used to change important information displayed in the Programming

Window. The information that can be displayed will vary depending on what menu you're currently in and/or what is currently

displayed in the Programming Window.

Display the Digital Voltage Indicator

While within a PROGRAMMING menu, pressing the Right

MENU key and the Left MENU key at the same time, or

pushing the two Toggle Switches forward at the same

time, will display the Digital Voltage Indicator.

Display the Current Modulation Type

While the Digital Voltage Indicator is displayed, pressing

and HOLDING the +/INC key, or pulling and HOLDING

the left Toggle Switch, will display the current Modulation

Type in use.

Display the Current TRM Switch Function

While the Digital Voltage Indicator is displayed, pressing

and HOLDING the DEC/- key, or pulling and HOLDING

the right Toggle Switch, will display the current function

assigned to the TRM switch.

Reset Programming Value to Default

While within a PROGRAMMING menu, pressing and

HOLDING the +/INC key and the DEC/- key at the same

time, or pulling and HOLDING both Toggle Switches, will

reset the Programming Value to the default value.

All SETUP menu options displayed are indicated by

the Setup Menu icon in the lower left corner of

the LCD. The icon indicates that you are at the top level

of that specific menu.

Enter the SETuP Menu

To enter the SETUP menu, press and HOLD the Left

MENU key and turn the transmitter ON or push and

HOLD the left Toggle Switch and turn the transmitter ON.

Summary of Contents for Gemini X

























































Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands

Sanwa Gemini X, Operating Manual

Search results

Summary of Contents for Gemini X

Reviews:

Related manuals for Gemini X

Brands by name

Popular brands