SANKO MR-300, Instruction Manual

Page: 24 / 35

-
23
-
5‑23
Communication with PC and printing out of the memorized data
Com. [COM:19200bps] is indicated blinking on the LCD.
↓
×
・
Ø (Selection of the communication speed)
↓
(Example) [192000bps]
←
Communication speed to be set(blinking indication)
Print [Prt] is indicated blinking on the LCD.
↓
Mem. [BLK.X] is indicated blinking When continuous plural blocks are communicated
↓
on the LCD. and printed out, select the first and last blocks.
×
・
Ø (Selection of the block) Data differ from the mode of the connected
↓ ←
Cancel (When the operation probe are not intended for the data processing.
is suspended)
Set Blinking stops, printing and communication with PC start.
5‑24
Graphically indicating the statistical data and the histogram
Mem. [BLK.X] is indicated blinking on the memory indicating part of the LCD.
↓
×
・
Ø (Selection of the indicating block)
↓
Stat. (Omit when indicating the histogram only)
↓
Hist. (Omit when indicating the statistical treatment only)
↓ ←
Cancel (When the operation is suspended)
Cancel Return to the measurement mode.
5‑25
Printing out the statistical data
Print [Prt] is indicated blinking on the LCD.
↓
Mem. [BLK.X] is indicated blinking When continuous plural blocks are printed out,
↓
on the LCD. select the first and last blocks.
×
・
Ø (Selection of the block) Data differ from the mode of the connected
↓ ←
Cancel (When printing out is probe are not intended for the data processing
.
suspended)
Stat. [x-mit] is indicated on the LCD and printing out starts.
5‑26
Printing out the histogram
Print [Prt] is indicated blinking on the LCD.
↓
Mem. [BLK.X] is indicated blinking When continuous plural blocks are printed out,
↓
on the LCD. select the first and last blocks.
×
・
Ø (Selection of the block) Data differ from the mode of the connected
↓ ←
Cancel (When printing out is probe are not intended for the data processing.
suspended)
Hist. [x-mit] is indicated on the LCD and printing out starts.
5‑27
Communication with PC of the statistical data
Com. [COM:19200bps] is indicated blinking on the LCD.
↓
×
・
Ø (Selection of the communication speed)
↓
(Example) [19200bps]
←
Communication speed to be set(blinking indication)
Mem. [BLK.X] is indicated blinking When continuous plural blocks are communicated,
↓
on the LCD. select the first and last blocks.
×
・
Ø (Selection of the block) Data differ from the mode of the connected
↓
probe are not intended for the data processing.
Stat. After completing the communication, the mode returns to the measurement mode in
hold condition.