-
9
-
f. Voltage drop of the printer
When the voltage of the battery supplying the power to the mechanical part and control part of the
printer drops until less than specific voltage, this mark is displayed. (Displayed only while operating the
printer)
When this mark is displayed, slide the cover of the battery space at the back side of the instrument
proper downwards and replace all four alkaline dry batteries for the printer unit part placed in left hand
with new ones quickly.
When replacing the batteries, turn OFF the power switch of the instrument proper before replacing.
If the dropped voltage is raised up to specific voltage with new batteries, the indicated mark disappears.
g. Indication of the communication speed
Communication speed of the data is displayed in the rate bit/second.
When the communication function with PC is OFF, the speed is not displayed.
h. Display of the hold mode
When the hold mode is set, [HOLD] mark is displayed and is not displayed in OFF condition.
i. Indicating mark of the upper limit value
When the upper limit value is set, [H] and the upper limit value are displayed together, and are not
displayed in un-setting condition.
j. Indicating mark of the lower limit value
When the lower limit value is set, [L] and the lower limit value are displayed together, and are not
displayed in un-setting condition.
k. Upper limit value
The input value with the keyboard or the upper setting value stored in the memory is displayed.
When no upper limit value is set, the value is not displayed.
l. Lower limit value
The input value with the keyboard or the lower setting value stored in the memory is displayed.
When no lower limit value is set, the value is not displayed.
m. Number of the measurement memory
When the initial block size is set, the memory capacity in one block is displayed.
While operating in the memory mode, memory number has been stored is displayed.
When no initial block size is set, the memory capacity is not displayed.
n. Number of the memory block
When the initial block size is set, total number of the blocks is displayed.
While operating in the memory mode, using block number is displayed.
When no initial block size is set, using block number is not displayed.
o. Indication of the measured value
Measured value is displayed.
