SANKI S-CON MINI-Z Series, Operating And Service Manual

Page: 34 / 36

34
CHECKING
PERIOD
PART TO
CHECK
PART TO CHECK
PART TO
CHECK
REMEDY
Daily Belt Foreign substances on
surface and undersurface
Visual inspection Visual inspection
Dislodgment from V-form
belt guidance grooves
Visual inspection Inspection, adjustment
Getting caught Visual inspection Inspection, adjustment
Drive pulley and
other pulleys
Foreign substances Visual inspection Clean and remove foreign
substances
Monthly Drive chain Slack, lubrication Visual inspection
and manual check
Take up slack.
Apply oil*.
Sprocket Wear of sprocket teeth,
damages
Visual inspection
and manual check
Inspection and adjustment
or replacement
Three
monthly
Geared motor Rotation malfunction,
loose attachment bolts
Visual inspection
and manual check
Inspection
Tighten loose bolts.
Overheat, abnormal noise Manual check,
listening
Inspection and adjustment
or replacement
Six
monthly
Drive pulley Wear of surface,
rotation malfunction
Visual inspection
and manual check
Inspection and adjustment
or replacement
Pulleys and
rollers
Rotation malfunction,
loose attachment bolts
Visual inspection
and manual check
Inspection, repair
Tighten loose bolts.
Overheat of bearings,
abnormal noise
Manual check,
listening
Inspection and adjustment
or replacement
Frame, stands,
attachments
Loose attachment bolts Visual inspection
and manual check
Tighten loose bolts.
Damages Visual inspection
and manual check
Inspection and adjustment
or replacement
*Appling oil to drive chain:
Apply oil to drive chain every 3 months or every 1,000 operating hours, following procedures below.
However, for machines using toothed belt (or timing belt) instead of drive chain, lubrication is
unnecessary.
-When using lubricating oil for bicycles etc.:
Remove cover-R by loosening cross-recessed pan head machine screws(*1). Drop oil onto drive
chain.
-When using spray type lubricating oil:
Spray oil into lubricating hole(*2). (It is unnecessary to remove cover-R.)
NOTE: If it is necessary to protect belt from oil mist, do not use spray type lubricating oil.
14-2. ITEMS FOR REGULAR INSPECTION