13
3-4. INSTALLING GUIDE RAILS AND SKIRTS (OPTIONAL)
1. Installing Guide Rails
When installing, slightly raise guide rails, giving clearance to prevent belt from touching them. If there is no
clearance, it may cause friction damage to belt and guide rails when belt deviates.
2. Installing Skirts
When installing, ensure skirts are properly touching belt.
If belt deviates, to prevent friction damage of belt and skirt fitting pieces, reinstall skirt fitting pieces raised as
required.
14
35
Skirt
S-A1 model, fixed type
14
35
Skirt
S-A1 model, fixed type
■
Insertion of Nuts
When installing additional attachments to frame, insert M6 hexagonal thin nuts into frame slots, as shown in
figures, below.
NOTE: These nuts are delivered as spare parts in tool bag.
M6 hexagonal thin nut
(1) Insert nut into slot diagonally from
above.
(2) Insert something cylindrical and
pointed (eg tip of mechanical
pencil) into nut hole, and lightly
push nut upward.
(3) Continue pushing nut this way until
in position.
Summary of Contents for S-CON MINI-Z Series
Page 1: ...1 S CON MINI Z Series OPERATING AND SERVICE MANUAL...
Page 35: ...35 MEMO...
