24
7
PULLEY REMOVAL
1. Head (or Tail) Pulley Removal
■
For Frame Depth of 30mm
Loosen pulley retaining block fixing bolts(*2) on tops of pulley brackets(*1) with hexagonal wrench.
Remove pulley retaining blocks(*3) upwards. Pulley may then be removed upwards.
■
For Frame Depth of 60mm
Loosen pulley retaining block fixing bolts(*5) on tops of pulley brackets(*4) with hexagonal wrench.
Remove pulley retaining blocks(*6) upwards. Pulley may then be removed upwards.
2. Snub Pulley Removal
(1) For re-assembly, mark initial position of take-up pulley on frame. Then fully loosen take-up pulley by
(1)
turning take-up knobs(*11).
(2) Remove either head or tail pulley.
(3) Remove safety cover(*7)(with 2 attachment bolts).
(4) Remove snub pulley bracket(*8)(with 1 attachment bolt).
(5) For machine of 3.1m or more in length, remove snub pulley retaining plate(*9)(with 1 attachment
(1)
bolt) attached on chain side.
NOTE: Do not loosen snub pulley adjustment bolt(*12).
3. Take-up Pulley Removal
(1) For re-assembly, mark initial position of take-up pulley on frame. Then fully loosen take-up pulley by
(1)
turning take-up knobs(*11).
(2) Remove either head or tail pulley.
(3) Turn take-up block(*10) outward and remove take-up pulley.
Summary of Contents for S-CON MINI-Z Series
Page 1: ...1 S CON MINI Z Series OPERATING AND SERVICE MANUAL...
Page 35: ...35 MEMO...
