31
12
TELESCOPIC MODEL
(SZVT model)
12-1. COMPONENT NAMES
NOTE: For assembly and operation, see p.8-19.
12-2. CHANGING MACHINE LENGTH
Be sure to switch off power supply and change machine length as follows:
1. Loosen right and left extension lock knobs(*1) under fixed frame.
2. Hold end of telescopic frame(*2) with your hands, and change machine length by sliding telescopic
2.
frame(*2) out-of/into fixed frame.
3. Once machine length is adjusted, retighten extension lock knobs(*1) to fix telescopic frame(*2).
NOTE: Slide telescopic frame(*2) parallel to fixed frame.
12-3. TAKING UP THE BELT
When belt is slackened off, take up belt as follows:
Take up belt by turning right and left take-up knobs(*3) of drive unit counterclockwise. When turning
take-up knobs(*3), adjust them alternately, little by little, to keep their movement lengths the same.
For belt tension, see p.20.
12-4. BELT ALIGNMENT ADJUSTMENT
When belt is not correctly aligned, make adjustment as follows:
For prior checking and outline of adjustment, see p.21-22.
Adjustment Using Take-up Knob or Tail Pulley, see p.22
Summary of Contents for S-CON MINI-Z Series
Page 1: ...1 S CON MINI Z Series OPERATING AND SERVICE MANUAL...
Page 35: ...35 MEMO...
