en
23
Operating the SaneoSPORT
Entering parameters
You can enter settings for training programs
U1
or
U2
. Your
program configuration will then be called up as for a default
program.
Hold the
Menu
button down.
After approx. three seconds the
program selection
menu
is displayed with the current program.
Press the
▲
button several times until the muscle build-up
program to be configured is displayed.
Press the
Menu
button to navigate to the first user-defined
parameter.
The parameter value flashes and can be reduced by actuating
the
▼
button or increased by actuating the
▲
button.
Please press the
Menu
button to confirm the value selected.
The next parameter is displayed.
Please continue as described until you reach the last
parameter (
training time
).
Once you have also confirmed the training time using the
Menu
button, the
program selection menu
closes.
The
application menu
for the configured program appears in the
display. Treatment with the preset parameter values can now
begin.
Starting the treatment
To start the treatment, please set the stimulation
intensity as described in the chapter Selecting the
stimulation intensity, page 21.
Ending training & cleaning the electrodes
The device automatically switches off when the training time
has ended. Training can be aborted at any time by using the
On/Off
button.
Please do not remove the body surface electrodes before the
device has been switched off.
