20
6
Hanging The Fan
Before installation all set screws must be checked, and tightened where necessary, before installation.
6.1 Attach Extension Tube (to Upper Yoke):
Attach the extension tube to the upper yoke with the hardware shown.
Before tightening the bolts, allow the fan to hang freely from the structure to
allow the fan to rest perpendicularly from the floor.
Tighten bolts to 90 ft-lb (122 N-m) using a 3/4” socket and torque wrench.
Single Pivot Hardware (supplied):
a. (2) 1/2” - 13x 3 1/2” GR 5 Bolt
b. (4) 1/2” Flat Washer
c. (2) 1/2”-13 Nylock Nut
Cable End Detail
The safety cable is a critical safety feature of the fan and must be installed correctly.
Le câble de sécurité est une caractéristique de sécurité essentielle de la soufflante qui doit être installé correctement.
WARNING/ AVERTISSEMENT
6.2 Secure Upper Safety Cable:
Secure the safety cable to the I-beam or angle iron by wrapping the safety cable around it, threading the cable through
the 17/32” open hole on the top of the extension tube, and securing the ends with the gripple fastener as shown. The
cable must have as little slack as possible. Securely tighten the gripple.
c
b
a
