31
9
Electrical Installation
9.2 Running the Motor Wire
The S&P Tempest Fan’ custom designed chassis makes for running the motor wire in an incognito fashion. The motor
wire slot on the top of the chassis allows the power wire to be ran through (or affixed to the side) of the extension
bar, then conveniently through the top plate of the chassis and directly in to the motor electrical box. See wiring
diagrams below.
9.3 Input Power Cable Wiring Schematics
IMPORTANT:
Grounding of the incoming power on the motor is required.
NOTE: S&P Suggests using a field supplied fused disconnect switch.
1 Phase Voltage: 120V/1Ph, 230V/1Ph
Motor wire can be ran
through the wire hole on
the chassis, then alongside
or within the extension
tube.
See Controller Data Sheet:
6-Core Shielded Conductor
Black - Phase 1
White - Phase 2
Green - Ground
