Sanding STS-750, Manual

Page: 68 / 214

③ After measurement, the
screen displays “Want More
Measurement?”. Press [F4] to
confirm it.
[F4]
Want More Measurement?
CANCEL OK
④ In backsight orientation
dialog, input the PtID
previously measured with Face
Ⅰ . Please follow procedure ③
of single point orientation.
【 Known Pt 】
Input Bs Pt!
Bs Pt ： BS1
R.HT
：
1.254m
V ： 90 ° 00 ′ 00 ″
LIST ENH
⑤ Reverse the telescope,
collimate on the backsight
point BS1, press [F1] ([All])
OR [F2] ([DIST]) +
[F3]([RECORD]) to start
orientation with coordinate
measurement. 2)~ 3)
※ ※
The upper-right corner displays
“1/ Ⅰ ”,indicating that Face Ⅰ
has measured the first
backsight points.
[F1]
or[F2]
+
[F3]
【 Known Pt 】 1/2 1/ Ⅰ ▼
Bs Pt
：
BS1
R. HT ： 1.860 m
HZ
：
0°00 ′ 00 ″
V ： 90°00 ′ 00 ″
： ﹉ . ﹉ m Ⅰ
： ﹉
.
﹉
m
All DIST RECORD EDM
⑥
After measurement, when
displaying “Want More
Measurement?” ,
[CANCEL]: Finish
measurement, and display
result.
[OK]: Proceed to measure other
backsight points. Repeat
procedure
②
~
⑤
to measure
the orientaion of more
backsight points. The
instrument provides orientation
with a maximum of 5 backsight
points.
Want More Measurement?
CANCEL OK
⑦
After all points which are
used for backsight orientation
are measured, in dialog of
procedure
⑥
, press [F4]([OK])
to display result.
[F4]
【
Orientation Result
】
No.Pts ： 5
Station
：
1
Hz Cor ： 172°22 ′ 57 ″
St. Dev.
：
0°00 ′ 20 ″
RESID OK
68