Sanding STS-750, Manual

Page: 133 / 214

(12) Input PtID of measurem
point and prism heig
c mate the prism center, a
press [F1] ([DIST]) o
measurement, the
en
ht,
olli nd
t start
program will
compute the stake-out offset
and
to
the
ake
rence Arc 】 【 Stake Out Refe t
PtID
：
21
R.HT ： 2.621 m
values between prism point
stake-out point. The method
stake out is referred to
Program “5.6.2 Polar St
Out”. ※ 1)
Hz
： △
-20°00 ′ 00 ″
△ ：
-2.082 m
△ ： -0.019 m Ⅰ
DIST RECORD NextPt ↓
All EDM BACK
∣
←
(13) After finishing staking o
one point, press [F3] ([NextP
to return to Stake Out Arc me
Press [F3]([PT+]
ut
t])
nu.
) or [F2] ([PT-])
to start staking out the nex
point.
※
2)
[F3]
【 Stake Out Arc 】
PtID
：
20
Miscls: ： End Arc
ArcLen ： 0.000 m
Arc Line ： 0.000 m
0.000 m Offset:
t
0SET OK
※
1) To return to Reference Arc-Window, pre
※ 2) The method to stake out is referred to “5.6.2 Polar Stake Out” Program.
ss [F3]([BACK]) in Key Page 2.
Display content:
1.Misclosure: If the entered arc length is not
here will be a
misclosure.
User has 3 options to distribute the misclosure:
1)
Start arc: All of the misclosure will be added to the first arc-section.
2) No distribution: All of the misclosure will be added to the last arc-section.
3) l be equally d str ions.
2.A of the arc-seg
3.Li ake-ou r length and the
selected m
4. O offset value.
Soft keys
[F
[
points.
4]([OK]): Proceed to Stake Out Measure dialog.
) Stake Out Chord
This allows to take out a series of equidistant chords along the arc. The screen contents and
the buttom shown, are the same as described in “Stake Out Arc” section.
an integer of the whole arc, t
Equal: The misclosure wil
rc length ： Enter the length
ne: Shows the line-value of t
isclosure distribution.
ffset : Here you can enter the
1]([0SET])
i ibute between all sect
ment to be staked out.
he st t point. This is calculated by the a c
： Set the value to 0.
t F2]([PT-]) and [F3]([PT+]): Toggel through the calculated stake-ou
[F
c
133