Samsung SRD-1680D User Manual Download Page 81

Page: 81 / 147

English

_81

●

main menu

preset Setting

A preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored.

Using the mouse may help make setup easier.

In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.

Select the <

Save

> key.

The virtual keyboard for inputting the preset will appear.

Refer to “

Using Virtual Keyboard

”. (Page 40)

•

Save : You can add and save the preset.

•

Rename : You can change the settings of the existing presets.

•

Delete : Deletes the selected preset.

•

Delete All : Deletes all existing presets.

If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset accordingly.

Press <

The preset will be saved as a name that you entered.

Camera Setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.

Using the mouse may help make setup easier.

•

Select <

Camera Setup

> in the PTZ Control menu.

The camera-specific menu appears.

You can configure the settings of only those cameras that support

the protocols of Samsung, Pelco D/P, AD and Panasonic.

If you are setting Auto Pan or Pattern in the camera menu, press

and hold the appropriate button for a certain time so that the

button operation can be different from that in normal PTZ setting.

2013-01-01 01:10:25

Camera Setup



Exit

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands