Samsung SRD-1680D User Manual Download

Page: 48 / 147

48_

main menu

SettING tHe DeVICe

You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

Press the [

] button on the remote control or front

panel.

Use the left/right button (

_ +

) to select <

Device

Device setting menu is selected.

Use the up/down buttons (

▲▼

) to move to <

Camera

and press [

eNteR

] button.

Select <

Camera

Displays settings window for Video, Audio, CH Name,

SEQ-Dwell Time, Screen Setup and Privacy Region.

Use direction buttons (

▲▼_ +

) to move to a desired item,

and set the value.

•

Type: It displays the camera type which can be connected

to the channel. According to the camera type displayed on

the screen, you may connect either SD or HD camera to

each corresponding connectors.

•

Video

- <

ON/OFF

> : You can turn ON/OFF the selected channel’s camera.

- <

Covert1

> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

- <

Covert2

> : Shows nothing but an empty screen while the recording continues.

If the channel is set to <

Covert1

> or <

Covert2

> mode, the channel’s sound is not hearable.

However, the channel’s sound is recorded if its Audio setting is set to <

>, even the sound is not heard in Live mode.

•

Audio

- If set to <

>, you can turn the audio of the channel ON/OFF on the Live screen.

- If set to <

OFF

>, the channel’s audio is off on the Live screen and not recorded.

Audio output is available for only 1 channel.

•

CH Name : Up to 15 characters including blanks are allowed.

Refer to “

Using Virtual Keyboard

”. (Page 40)

The first character should not be empty.

Device

Logout

Return

Camera
Storage Device
Remote Device
POS Device
Monitor

CH Type Video



Audio



CH Name SEQ-Dwell Time



1 HD ON



OFF



CAM 01 5 sec



2 HD ON



OFF



CAM 02 5 sec



3 HD ON



OFF



CAM 03 5 sec



4 HD ON



OFF



CAM 04 5 sec



5 HD ON



OFF



CAM 05 5 sec



6 HD ON



OFF



CAM 06 5 sec



7 HD ON



OFF



CAM 07 5 sec



8 HD ON



OFF



CAM 08 5 sec



Camera

Screen Setup

Privacy Region

Cancel

PTZ

Previous/Next Page

HD/SD Switch

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands