Samsung SRD-1680D User Manual Download

Page: 118 / 147

118_

backup viewer

Part Names

Functions

Split Screen

Set the screen’s aspect ratio to be displayed.

The screen switches to the selected split screen mode.

Split screen function is not supported during the CD/DVD backup.

Screen Printout

Saves the current video’s image as in an image file. Supports jpeg file format.

Prints out the current screen. You should have installed the appropriate printer

driver before you can print out the screen.

Audio

A toggle button. Each time you press this button, the audio output will toggle

between activated and deactivated.

You can adjust the volume level from 0 to 100.

Watermark

Press the button to enable file tampering detection, to detect data file forging.

Deinterlace

You can enable the De-interlace function.

Show OSD

Check the OSD checkbox to display the OSD information on the backup

playback screen.

Information such as backup date, day of the week, time, model name, and

channel number will be displayed on the screen.

Enlarge /

Reduce Timeline

Collapses the time range that is displayed on the range bar of the storage

time. You can collapse the range bar until the overall range is shortened to

24 hours.
Enlarges the time range that is displayed on the range bar of the storage

time. You can enlarge the range bar until the overall range is extended to

1 minute.

Restore Timeline

Restores the timeline to the default.

Display of storage time range

Displays the time range of a stored video file.

You can move the gridline of the range bar to select a time point to play.

Playback Control

You can adjust the video playback of the timeline.

If it has a high recording rate and is played at high speed playback of 16x or higher speed in the backup viewer,

actual playback speed may not reach the set playback speed.

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands