Samsung SRD-1680D, User Manual

Page: 49 / 147

English _49
●
mAIN meNu
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.
`
If set to < OFF >, the channel is not listed in the Auto Sequence mode.
• Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the < (Brightness) >,
< (Contrast) >, and < (Color) > of the selected channel.
`
Press the < Init > to initialize settings back to the default 50.
` You cannot adjust Brightness, Contrast or Color for HD-SDI
Channel
.
• Privacy Region : You can specify a certain area of the
camera video to be protected for your privacy.
• HD/SD Switch: You may setup the numbers of HD channel based on your needs, after completing setup,
please click OK on HD/SD Switch menu, and DVR would restart to take effect.(HD/SD Switch is available
for SRD-1680D only.)
6. When the camera setup is done, press < OK >.
to set the privacy zone

Select < privacy Region >.

When “ privacy Region ” window appears, select a
channel for detection and set the area of motion
detection.
•
To set the area in “ privacy Region ” window
In the “ privacy Region ” window, select desired region
from < >.
•
privacy Region
You can specify up to 4 privacy zones for each channel,
which can be identified by the color.
1 Purple 2 Green 3 Blue 4 Yellow
•
To set the area using < Individual > selection
Privacy Region
OK Cancel
Apply to All CH
CH1
Privacy Region1
Individual
In the “ privacy Region ” window, you can select cells individually by using < Individual >.
When selected < Individual >, “ privacy Region ” window disappears and you can select cells one by one.
When the motion area setup is done, Right-click to select < menu > in the context menu or the [ meNu ]
button on the remote control to display the “ privacy Region ” window again.
- Clear All : Selected cell is removed from the Privacy Region.
- Menu : After selecting individual motion areas, move to the “
privacy Region ” window.
`
If selected < Apply to All CH >, selected motion area is applied to all channels.

When completing the privacy zone settings, click < OK >.
Clear All
Menu
Screen Setup
Init Apply to All CH CH1 50 50 50
OK Cancel