English
_15
●
over
view
using the numeric buttons
CHANNEL 1–9
Press each button between 1 to 9.
CHANNEL 10
Press the [
+10
] button first, then press the 0 button again within 3 seconds.
CHANNEL 11–16
Press the [
+10
] button first, then press any number between 1 to 6 within 3 seconds.
Changing the remote Control Id
Remote control’s ID and DVR’s ID should be matched for proper operation.
1.
Press the [
Id
] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2.
Enter 2 digits of your selection in order, while pressing the [
Id
] button of the remote control.
3.
When ID input is done, press the [
Id
] button of the remote control again to check the setting.
M
`
If you want to change the remote control ID to 08: Press 0 and 8 in order while the [
ID
] button of the remote control is
pressed.
For changing the ID of remote device, refer to “
Remote Devices
”. (Page 54)
