Samsung SRD-1680D User Manual Download

Page: 18 / 147

18_

installation

Cautions on hdd installation

When adding a new HDD, make sure to fasten screws tightly and use appropriate parts if required to fix

the HDD. Otherwise, the product may be damaged or does not operate properly.

Please check the HDD compatibility before adding a HDD.

Please contact your nearest dealer to obtain the list of compatible devices.

Installing the hdd

If the installed HDD had been used with other devices, it will be automatically formatted.

•

Installing hdd by opening the cover

Pulling the front cover from the unit.

Remove the screws from the bracket safety.

Separate the HDD bracket by pushing the lock on the left.

Be careful not to scratch the hand while separating the HDD

bracket.

Bracket

safety

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands