Samsung SRD-1680D User Manual Download

Page: 64 / 147

64_

main menu

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help make setup easier.

Use the up/down buttons (

▲▼

) in <

event

> window to

move to <

Alarm Schedule

>, and press [

eNteR

] button.

Use direction buttons (

▲▼_+

) to move to a desired item,

and set the value.

•

Alarm : Sets the alarm output method.

For further information on alarm output, refer to “

HDD Alarm

Alarm

”. (Page 53)

•

ON : Marked in orange, and always generates alarm on

scheduled time.

•

OFF : Marked in white, no alarm is generated even if an event occurs.

•

Event Sync : Marked in Blue, generates alarm only when an event occurs.

•

Apply to All Alarm : Applies the configured schedule to all

alarms.

When the alarm is generated on the scheduled time, you can

stop the alarm by canceling the schedule.

When the Alarm Schedule setup is done, press <

BACKup

You can check the backup device and set the backup schedule by channel or by time.

The product only supports external HDD of USB memory, CD/DVD and USB/SATA type. (Page 120)

Setting the Backup

You can backup the desired data to a connected device.

Using the mouse may help make setup easier.

Press the [

] button on the remote control or front

panel.

Use the left/right button (

_ +

) to select <

Backup

Backup menu is selected.

Backup

Logout

Return

Backup

All 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol

OFF

Event Sync

Apply to All Alarm

Cancel

Alarm Schedule

Alarm1

All 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol

OFF

Event Sync

Apply to All Alarm

Cancel

Alarm Schedule

Alarm1

Apply to All Alarm

Cancel

Apply the alarm scheduling to all?

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands