Samsung SRD-1680D, User Manual

Page: 70 / 147

70_ main menu
main menu
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection mode.
when no router is used
• Static mode
- Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR
and remote user.
- DVR Network Settings : Set the < Connection mode > in
< Interface > menu of the connected DVR to < Static >.
` Consult your network manager for IP Address, Gateway and
Subnet Mask.
• DHCp mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP PPPoE modem or FTTH network.
- DVR Network Settings : Set the < Connection mode > in
< Interface > menu of the connected DVR to < DHCp >.
• pppoe mode
- Internet connection : An PPPoE modem is directly connected to the DVR, where the PPPoE connection
requires user ID and password.
- DVR Network Settings : Set the < Connection mode > in
< Interface > menu of the connected DVR to < pppoe >.
`
< ID > and < Password > should be the same to the PPPoE user
information.
If you don’t know the ID and password, consult your PPPoE service
provider.
Connection Mode
Interface
Port

IP Type Static

Transfer Bandwidth 2Mbps
OK Cancel

IP Address 192.168.1.200

Gateway 192.168.1.1
 Subnet Mask 255.255.255.0
 DNS Manual 168.126.63.1
Connection Mode
Interface
Port
 IP Type PPPoE

Transfer Bandwidth 600kbps
OK Cancel

IP Address 192.168.1.200
 Gateway 192.168.1.1

Subnet Mask 255.255.255.0

DNS Manual 168.126.63.1
 ID ID

Password
************