Samsung SRD-1680D User Manual Download

Page: 42 / 147

42_

main menu

to restrict the user permissions

If the admin restricts all permissions of an added group, the users belonging to that group can access only

the default minimum menus and can change the user’s own password only.

Start the DVR.

If all permissions are restricted, only the Login dialog

should appear.

Right-click any area on the screen.

If all permissions are restricted, only the accessible context

menus should appear.

to change the user password

If you log in with a user account that is restricted to access the menu, you can change your own password only.

Select <

user menu

The Permission Management setup screen appears.

Select <

permission management

The Password setup dialog appears.

Enter a new password.

Select <

You change to the password will be applied.



USER



New Password

************



Confirm P/W

************

Permission Management

User

Cancel

Login



abc



Password

Cancel

2013-01-01

01:10:25

2013-01-01 01:10:25

Scene Mode



Audio Off
Freeze
Stop Alarm
Record
User Menu
Hide Launcher
Logout

Summary of Contents for SRD-1680D




















































































































































Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands

Samsung SRD-1680D, User Manual

Search results

Summary of Contents for SRD-1680D

Reviews:

Related manuals for SRD-1680D

Brands by name

Popular brands