Samsung SMT-i5343 Page 107 User Manual Download

Page: 107 / 201

SMT-i5343 User Guide _

105

Description

AOM

You can set up Add-on Module and check the AOM information.

Phone
Management

You can maintain phone information, software upgrade, restart, or
factory default.

Phone Information

Sub-menus

Function

Phone
Information

1 Line Status

The list of connected line number, username,
phone number, or status is displayed.

2 Information

The network information and model
information of the phone is displayed.

3 Phone Language

You can change the language of phone.

After change, press the

[Save]

button to apply

the change.

4 Network Setting

Go to Network
Setting

Click Go to Network Setting to go to the
network
setting page.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands