Samsung SMT-i5343 User Manual Download

Page: 74 / 201

Buddy Registration

You can register a new buddy.

Select

[Menu]



[Contacts]



A desired user



[Edit]



[Add Field]

soft button.

Press the

[Buddy ID]

among the items.

When the buddy ID is displayed in the
contact screen, enter the buddy ID.

After entering the buddy ID, press the

[Save]

soft button.

- The buddy ID can be English or number.

Retrieving Buddy Status

You can retrieve the status of a registered buddy.

When you select

[Menu]



[Contacts]

soft button, the current status of a buddy
is displayed beside the user.

- The buddy status is not displayed if the user

logs out.

- Call Available:

If the phone icon is blue,

the user can take a call.

- In a Call:

If the phone icon is red, the user

is busy.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands