Samsung SMT-i5343 User Manual Download

Page: 94 / 201

- A Bluetooth headset is provided separately.

- The method of use and support may differ depending on the type of Bluetooth

headset. Refer to the user manual of the Bluetooth device.

Bluetooth Connection

Select

[Menu]



[Settings]



[Bluetooth &

Headset]



[Bluetooth Connection]

[Bluetooth mode is ‘Headset’]

After searching nearby Bluetooth devices,
the connection information is displayed.

After selecting a Bluetooth headset to
connect to the phone, press the

[Pairing]

button.
After checking it is the correct device,
press the

[Register]

button.

- The Bluetooth headset to connect must be in

the pairing waiting mode.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands