Samsung SMT-i5343 Page 42 User Manual Download

Page: 42 / 201

Video Call

If a USB camera is connected to the phone, you can make a video call.

- A USB camera required for video call is not included in this product.

Purchase it separately.

- For the types of USB camera which can be used in the phone, contact the

system administrator.

- The video call function is available from V2.0 version or later.

Sending a Video Call

You can send a video call if your counterpart has a phone that supports video call.

In the video call mode, your video is
displayed at the right bottom of screen.

- After entering a phone number, you can start a

video call using the

[Video Call]

soft button.

When a video call is connected, the other
party’s image is displayed on the left, and
the user’s image is at the bottom right of
the screen.

- During video call, you can turn on/off your video

using the

[Video Off]/[Video On]

soft button.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands