Samsung SMT-i5343 User Manual Download

Page: 96 / 201

When the smartphone is connected, you
can use the call move function between
the phone and smartphone.

- In the phone waiting screen, you can see

‘Bluetooth’ information is displayed under your
phone number.

- When a call is received to the smartphone,

there is a ringtone both at the phone and
smartphone and you can select either one to
receive the call.

- While talking through the smartphone, you can

press the

[Headset]

button to move the call to

the phone. You can also move a call from the
phone to the smartphone by pressing the

[Move]

button.

When you press the

[Disconnect]

button,

the device is disconnected.

When you press the

[Remove]

button, the

device is deleted from the search list as
well as it is disconnected.

Summary of Contents for SMT-i5343










































































































































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, User Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands